InFocus IN5122 - Manual (Page 61)

59
Item Description
Time difference
Configures the time difference. Set the same time difference
as the one set on your computer. If unsure, consult your IT
manager.
SNTP
Click [ON] checkbox to retrieve Date and Time information
from the SNTP server and set the following items.
SNTP Server Address
Configures the SNTP server address in IP format.
• The address allows not only IP address but also domain
name if the valid DNS server is setup in the Network
Settings
. The maximum length of host or domain name is up
to 255 characters.
Read Frequency
Configures the interval at which to retrieve Date and Time
information from the SNTP server (hour:minute).
Click [Apply] button to save the settings.
• The new configuration settings are activated after the network
connection has been restarted. When the configuration settings are changed,
you must restart the network connection. You can restart the network
connection by clicking [Network Restart] on the Advanced Menu>Network
submenu.
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses.
• To enable the SNTP feature, the time difference must be set.
• The projector will retrieve Date and Time information from the time server and
override time settings when SNTP is enabled.
• The internal clock’s time may not be accurate. Use SNTP to maintain accurate
time.
NOTE
3.8 Date/Time Settings (Continued)
3. Web Control