InFocus IN5122 - Manual (Page 17)

15
1.5.1 Passcode connection
The unique Passcode system allows you to quickly and simply connect to the
network.
The Passcode is a code that expresses the network settings in the projector. If you
input the code in the “LiveViewer” in your computer, the network settings in the
projector and computer can be matched and the connection will be established
immediately.
The section explains how to use the Passcode.
• The Passcode system will not work under the following conditions. If
this occurs, establish network connection manually.
1) Subnet mask is not Class A or B or C.
The Passcode system accepts Class A, B and C only.
Class A:(255.0.0.0), ClassB:(255.255.0.0), Class C:(255.255.255.0)
NOTE
The Passcode is 12-digit code consisting of alphanumeric characters (“1-9” and
“A-Z”).
Example: PASSCODE 1234-5678-9ABC
The Passcode is given on the projector when the LAN port is selected as input
source.
(1) Getting the Passcode
There are two methods to get the Passcode from the projector
1) Turn on the projector, and make sure that the projector image is on screen.
2) Press the COMPUTER button on the remote control or the projector to select
the LAN as input port.
If there is no signal on the LAN port, you can find the Passcode on screen.
Method 1
1. Connection to the network
1.5 Selecting the network connection method (continued)