InFocus IN5122 - Manual (Page 51)

49
3.3 Network Settings
Displays and configures network settings.
Item Description
IP Configuration Configures network settings.
DHCP ON
Enables DHCP.
DHCP OFF
Disables DHCP.
IP Address
Configures the IP address when DHCP is disabled.
Subnet Mask
Configures the subnet mask when DHCP is disabled.
Default Gateway
Configures the default gateway when DHCP is disabled.
Projector Name
Configures the name of the projector.
Up to 64 alphanumeric characters may be used. In addition,
these symbols can be used: !"#$%and'()*+,-./:;<=>?@[\]^_`{|}~
and space. Particular projector names are pre-assigned by
default.
Projector Location
(SNMP sysLocation)
Configures the location to be referred to when using SNMP.
Up to 255 alphanumeric characters can be used.
Projector Contact
(SNMP sysContact)
Configures the contact information to be referred to when
using SNMP.
Up to 255 alphanumeric characters can be used.
DNS Server Address
Configures the DNS server address.
AMX D.D.
(AMX Device Discovery)
Configures the AMX Device Discovery setting to detect the projector
from the controllers of AMX connected to the same network. For the
details of AMX Device Discovery, visit the AMX website.
URL: http://www.amx.com
•
The new configuration settings are activated after the network connection has
been restarted. When the configuration settings are changed, you must restart the network
connection. You can restart the network connection by clicking [Network Restart] on the
Advanced Menu>Network submenu. If you connect the projector to an existing network, consult
a network administrator before setting server addresses.
NOTE
3. Web Control
Click [Apply] button to save the settings.