InFocus IN5122 - Manual (Page 37)

35
1.9.4 Registering My Connection
1.9 Profiles (continued)
One of the most used Profiles can be registered as the My Connection Profile.
Once the Profile is registered, all you need to do is to select My Connection to
connect to the network. (&12)
1) Click [My Connection].
2) The “Add My Connection” screen will display.
The currently selected Profile for My
Connection will display with a checkmark
next to it.
3) Select one of the Profiles listed in the
window and put a mark in the checkbox.
The previously selected Profile will
unchecked.
4) Click [OK], then the window is closed.
If you don’t want to select a new one, click
[Cancel]
.
• If you do not want to use My Connection, do not check the checkbox.
Just click [OK].
• In the list, all Profiles are shown regardless of which network adapter is
selected. You can register a Profile that is not for the currently selected network
adapter as the My Connection Profile.
NOTE
1. Connection to the network