Sharp PC-MM1 - Manual (Page 114)

T-8
to connect again. (The distance between computers or access points should be less
than approximately 190 ft. (60 m) in the direct line-of-sight.)
•
Confirm the IP address and the subnet mask of each computer are set correctly.
•
Confirm the WEP key is correctly entered if the WEP security of other devices,
which you want to communicate with, is enabled.
Trouble with Peripherals
Question: Why don't peripheral devices function correctly?
•
Confirm they are correctly connected to your computer.
•
Confirm they are Windows XP compliant.
•
Confirm drivers necessary for the devices are installed.
•
Set System standby and System hibernates to Never in Power Options Properties
dialog box. If this does not work, set Turn off hard disks to Never.
Question: Why can't I print?
•
Make sure the printer is turned on.
•
Check whether your computer and the printer are connected correctly.
•
Check whether the printer is ready to print.
•
Check whether the printer has enough paper.
•
Check whether the printer driver is installed.
•
From the start menu, select Control Panel – Printers and Other Hardware -
Printers and Faxes. If Classic view is selected, double-click Printers and Faxes
icon. Confirm your printer is installed there. If not, click Add a printer of Printer
Tasks to install your printer.
•
See also the Windows help program by clicking start – Help and Support.