Sharp PC-MM1 - Manual (Page 54)

4-4
4
Inserting Floppy Disk
Hold the floppy disk with the arrow facing up, toward the drive. Slide the disk into the
drive until it locks into place.
• Always insert a floppy disk straight into the floppy disk drive.
• When inserting the disk, make sure it is not upside down.
• Do not use excessive force when inserting the floppy disk. If you have
difficulty inserting or removing disks, seek the assistance of an
authorized service technician.
• Do not touch the disk while reading/writing data. It may cause
malfunction of your computer and the drive.
Ejecting Floppy Disk
Before ejecting the floppy disk, make sure the indicator of the floppy disk
drive unit is not lit.
Press the eject button firmly. The disk pops out slightly. Eject it and store it properly.
Indicator
Arrow Facing Up
Eject Button