Boot menu, Exit menu – Sharp PC-MM1 User Manual

Page 90

Advertising
background image

6-6

6

5. Select

Exit menu and confirm Exit Saving Changes is highlighted; then press

Enter

6. Confirm

Yes is highlighted and press Enter. The system restarts.

Boot Menu


Boot Sequence specifies where the system boots from. Press Enter to open the sub
menu. The system boots from the drive at the top of the list. If the system cannot find
the drive, it will boot from the second one; then, third one; then forth one. Use arrow
keys to select the drive you want to move; then, use minus key or space bar to move it
up and down.

USB Boot enables or disables the boot from the USB floppy disk drive or the USB
CD drive.

LAN Boot defines whether the system boots from other server via the LAN unit of
your computer.

Exit Menu


Exit Saving Changes saves the settings you have changed and exits the Setup Utility.

Exit Discarding Changes exits the Setup Utility without saving the settings you have
changed.

Load Setup Defaults returns the values of all items to the default. To exit, select one
of the above items.

Discard Changes returns the values of all items to the values you last saved. To exit,
select one of the above two items.

Save Changes saves the settings you have changed. To exit, select one of the above
two items.

Advertising