Symbol Technologies MK1000 - Manual (Page 110)

5-8
MK1000 MicroKiosk Product Reference Guide
Default Display Messages
There are three default display messages that can be overridden by downloading a
resource file, or through host commands. Downloaded resource file messages are retained
until a new resource file is sent, while messages sent through host commands are lost
when the unit is powered down, and must be resent when the unit is powered up again.
Powerup Message
This default message displays when the unit powers up.
Figure 5-1. Powerup Default Message
Idle Message/Host Connection Failure Message
This default message displays if the MK1000 is not polled by the host for more than one
minute, or if a connection fails to the host.
Figure 5-2. Idle/Connection Failure Default Message
6\PERO 7HFKQRORJLHV
0.
2XW RI 6HUYLFH
3OHDVH 7U\ /DWHU $