Symbol Technologies MK1000 - Manual (Page 31)

2-1
Chapter 2
Setup and Installation: Mechanical
Overview
This chapter describes the hardware setup and installation of the MK1000.
Topics covered in this chapter include mounting, providing power, and connecting
communication cables (if required) for the following four MK1000 communication
interfaces:
• Wireless Ethernet (2Mb or 11Mb RF)
• Power via AC outlet
• Power via Power-over-Ethernet
• Wired Ethernet (10Base-T cable)
• Power via AC outlet
• Power via Power-over-Ethernet
• Wired RS-485 (Serial cable)
• Wired RS-232 (Serial cable).
Note: After completing the mechanical installation of the MK1000,
refer to Chapter 3, Setup and Installation: Communication to
establish communication with the host.