Symbol Technologies MK1000 - Manual (Page 61)

3-13
Setup and Installation: Communication
TCP/IP Configuration
When the TCP/IP option is scanned for TCP/IP configuration, the following screen displays:
Figure 3-6. TCP/IP Configuration Page 1
Scan the number "6" bar code to display the second TCP/IP screen.
Figure 3-7. TCP/IP Configuration Page 2
Scan the required numeric bar code(s) to enter data in any field, as necessary. For Host IP
addresses, you must enter three digits for each segment for "dots" to be supplied correctly.
For example, if you want to set the address 10.10.1.2, you must enter 010.010.001.002.
Remember to scan the Save & Exit bar code when you are finished, or scan Cancel to
escape WITHOUT completing the entry.
7&3,3 &RQILJXUDWLRQ 3DJH 
'+&3 (QDEOHG 1R
,3 $GGUHVV  
6XEQHW 0DVN 
*DWHZD\ 
*R WR '16 6FUHHQ
*R WR 3DJH 
6FDQ LWHP QXPEHU WR HGLW
7&3,3 &RQILJXUDWLRQ 3DJH 
+RVW ,3 
+RVW 3RUW 
*R %DFN WR 3DJH 
6FDQ LWHP QXPEHU WR HGLW