Symbol Technologies MK1000 - Manual (Page 75)

3-27
Setup and Installation: Communication
The Network Configuration Menu
From the MK1000 Configuration menu (see Figure 3-10 on page 3-17 ), press the Previous
or Next buttons to move the "<" cursor to the Network option and press the Enter button.
The Network Configuration menu displays:
Figure 3-17. Network Configuration Menu
Note: If DHCP mode is disabled and the IP address for either Ethernet or
Radio is set to 0.0.0.0 (all zeros), then that interface attempts a
BOOTP operation to obtain its IP address, Netmask and Gateway
IP. Once a DHCP or BOOTP operation is successfully performed,
the appropriate fields for the requesting device are filled in with the
obtained values.
Network Configuration
TCP/IP
Server
Ethernet
Radio
TFTP
<