Symbol Technologies MK1000 - Manual (Page 93)

3-45
Setup and Installation: Communication
Parity Press the Previous or Next buttons to move the "<"
cursor to this field and toggle by pressing the Enter
button to select Parity.
The default Parity for MK1000 RS-485 port settings
is NONE.
Available Parity settings: NONE, ODD, or EVEN.
Data Bits Press the Previous or Next buttons to move the "<"
cursor to this field and toggle by pressing the Enter
button to select the Data Bits.
The default Data Bits setting for MK1000 RS-485
port settings is 8 BITS.
Available Data Bits settings: 7 BITS or 8 BITS.
Stop Bits Press the Previous or Next buttons to move the "<"
cursor to this field and toggle by pressing the Enter
button to select the Stop Bits.
The default Stop Bits setting for MK1000 RS-485
port settings is 1 BIT.
Available Stop Bits settings: 1 BIT or 2 BITS.
Flow Control Press the Previous or Next buttons to move the "<"
cursor to this field and toggle by pressing the Enter
button to select the Flow Control.
The default Flow Control setting for MK1000 RS-
485 port settings is DTR/DSR.
Available Flow Control settings: DTR/DSR, BUSY,
NONE, or XON/OFF.
Echo Mode Press the Previous or Next buttons to move the "<"
cursor to this field and toggle by pressing the Enter
button to select the Echo Mode.
The default Echo Mode setting for MK1000 RS-485
port settings is OFF.
Available Echo Mode settings: ON or OFF.
Table 3-19. RS-485 Config Screen Definitions (Continued)
Field Name Description