Symbol Technologies MK1000 - Manual (Page 66)

3-18
MK1000 MicroKiosk Product Reference Guide
Entering, Navigating & Saving Changes
Entering the MK1000 Configuration Menu
There are three ways to access the MK1000 Configuration menu:
• locally using the MK1000 function buttons
• locally by scanning bar codes
• remotely via Telnet.
For information about accessing Configuration menus/screens remotely via Telnet, refer to
Configuration via a Telnet Session on page 3-47.
To use the MK1000 function buttons to access the first configuration menu:
1. Press the '1' and '4' buttons simultaneously to display the Password screen.
Figure 3-11. Password Screen
2. Using the four function buttons, enter the password '44213'.
Note: If you enter the wrong 5-digit password, the system returns to the
Out of Service screen. Press the ’1’ and ’4’ buttons simultaneously
to start over.
If you enter less than 5-digits and want to start over, enter five
random digits to fill the buffer and return to the Out of Service screen.
Enter Password:
[ _ ]