Ethernet configuration screen, Ethernet configuration screen -33, Figure 3 – Symbol Technologies MK1000 User Manual
Page 81
3-33
Setup and Installation: Communication
Ethernet Configuration Screen
From the Network Configuration menu (see
), press the Previous
or Next buttons to move the "<" cursor to the Ethernet option and press the Enter button.
To return to the Network Configuration menu, press the ‘1’ button to escape.
The wired Ethernet Config screen displays:
Figure 3-21. Ethernet Config Screen
Server Port
Press the Previous or Next buttons to move the "<"
cursor to this field and enter the Server port.
The default Server Port for the MK1000 is 4050.
Server Name
Press the Previous or Next buttons to move the "<"
cursor to this field and enter the Server name.
Table 3-11. Server Configuration Screen Definitions (Continued)
Field Name
Description
Ethernet Config
Ether Mac = 00:60:A3:00:2D:BD
Enabled = NO
IP Address = 192.168.0.1
Netmask IP = 255.255.255.0
Gateway IP = 255.255.255.255
<