Symbol Technologies MK1000 - Manual (Page 22)

1-4
MK1000 MicroKiosk Product Reference Guide
Features of the MK1000
Buttons and Controls
Programmable Function Buttons
The MK1000 has four programmable function buttons (shown in Figure 1-1 on page 1-3 ).
These buttons can be programmed to allow the user to perform various tasks such as
navigating through an application and making decisions when prompted.
Note: For details on how to navigate MK1000 screens, see Navigating the
MK1000 Configuration Menu on page 3-19.
For details on how to enter alphanumeric values while in the
MK1000 Configuration menu, see Entering Alphanumeric Values on
page 3-21.
Reset Button
The Reset button (shown in Figure 1-1 on page 1-3 ) can be used to reset the system. The
Reset button is located on the lower right-hand side of the unit and marked with

. Use a
paper clip to push the switch.
Contrast Control Button
The display Contrast Control button is located below the Reset button (shown in Figure 1-
1 on page 1-3 ) and marked with

. Use the tip of a small screwdriver to make contrast
adjustments, if required.