Symbol Technologies MK1000 - Manual (Page 60)

3-12
MK1000 MicroKiosk Product Reference Guide
Editing Software Handshaking
Note: Software Handshaking configuration supported in PCK emulation
versions 1.06 and greater.
When you scan the “5” bar code at the Select Host Type screen, the Software Handshaking
Config screen displays.
Figure 3-5. Software Handshaking Config Screen
Scan the numeric bar code corresponding to the type of Software Handshaking desired.
Once scanned, you are returned to the Select Host Type screen.
Changing Host Configuration
Change Host Config- PCK Configuration Menu Option 3
To select or change the settings for a particular host type, choose Change Host Config at
the PCK Configuration
menu by scanning the "3" bar code located in the section Numeric
Bar Codes on page B-7.
This system displays a host configuration screen that matches the host type currently
selected. If it is inappropriate, scan the Cancel bar code to return to the main PCK
Configuration
menu and scan the “2” bar code (Change Host Type) to set the correct host
type.
The host configuration screen displayed can be a Serial type (RS-232 or RS-485), or an
Ethernet host. If an Ethernet host, either a TCP/IP configuration or UDP/IP configuration
screen displays. Ensure this setting is correct. If not, correct it before you proceed. Both
host types (Serial and Ethernet) have two pages of parameters to set, and both are handled
similarly.
6RIWZDUH +DQGVKDNLQJ &RQILJ
&XUUHQW +6 $&.1$.
 1RQH
 $&.1$.
 (14
 $&.1$. ZLWK (14
 5$:
6FDQ  IRU 6: +6 7\SH