Symbol Technologies MK1000 - Manual (Page 95)

3-47
Setup and Installation: Communication
Configuration via a Telnet Session
Overview
A Telnet client can be used to remotely connect to the MK1000 and remotely access the
MK1000 Configuration menu. And, as mentioned in the MK1000 Configuration menu
overview, the MK1000 Configuration menu is used to configure the unit for operation with
PCK based applications. The MK1000 Configuration menu can also be used to configure
the unit for operation with a custom application not based on PCK emulation.
From the MK1000 Configuration menu, all MK1000 parameters can be accessed except
the PCK communication interface (Change/Select Host Type), software handshaking, and
RS-485 Net ID. These parameters can only be accessed from the PCK Configuration
menu. For information on alternate methods of configuring the MK1000, see
page 3-3 .
MAP: Telnet Menu
Upon initiating the Telnet session, the following screen appears.
Figure 3-29. Telnet Session Menu
Press the ‘2’ button to enter the MK1000 Configuration menu.
From this point on, screens appear as they do when navigating the MK1000 Configuration
menu as shown on page
3-16 .
1. Debug
2. Configuration
Select: