Symbol Technologies MK1000 - Manual (Page 77)

3-29
Setup and Installation: Communication
TCP/IP Configuration Screen
From the Network Configuration menu (see Figure 3-17 on page 3-27 ), press the Previous
or Next buttons to move the "<" cursor to the TCP/IP option and press the Enter button. To
return to the Network Configuration menu, press the ‘1’ button to escape.
The TCP/IP Configuration screen displays:
Figure 3-18. TCP/IP Configuration Screen
Radio When selected, the Radio option displays the
Radio Configuration
screen (see Figure 3-22 ). The
configuration screen for the Radio is nearly
identical in function to that of the Ethernet port. The
MAC address of the Radio (if present) is displayed
at the top of the configuration screen (also factory
assigned). Also on this screen is a link to RF
Settings (see
Figure 3-23 ) that allows configuration
of Radio specific parameters such as ESS ID,
Encryption type, Key ID and Key Management.
From the Key Management screen it is possible to
enter the various key (button) values in
Hexadecimal form.
TFTP Not implemented. In the future, this option will be
used to specify a host system from which OS
Firmware updates may be obtained.
Table 3-8. Network Configuration Menu Definitions (Continued)
Field Name Description
TCP/IP Configuration
Primary Interface = RADIO
DHCP
Client ID =
<
Domain Setup
<
= DISABLED CID = DISABLED