Symbol Technologies MK1000 - Manual (Page 62)

3-14
MK1000 MicroKiosk Product Reference Guide
UDP/IP Configuration
When the UDP/IP option is scanned for UDP/IP configuration, the following screen displays
(scan the number "6" bar code to display the second UDP/IP screen):
Figure 3-8. UDP/IP Configuration Pages 1 & 2
Scan the required numeric bar code(s) to enter data in any field, as necessary. For Host IP
addresses, you must enter three digits for each segment for "dots" to be supplied correctly.
For example, if you want to set the address 10.10.1.2, you must enter 010.010.001.002.
Remember to scan the Save & Exit bar code when you are finished, or scan Cancel to
escape WITHOUT completing the entry.
8'3,3 &RQILJXUDWLRQ 3DJH 
'+&3 (QDEOHG 1R
,3 $GGUHVV  
6XEQHW 0DVN 
*DWHZD\ 
*R WR '16 6FUHHQ
*R WR 3DJH 
6FDQ LWHP QXPEHU WR HGLW
8&3,3 &RQILJXUDWLRQ 3DJH 
+RVW ,3 
+RVW 3RUW 
*R %DFN WR 3DJH 
6FDQ LWHP QXPEHU WR HGLW