Symbol Technologies MK1000 - Manual (Page 41)

2-11
Setup and Installation: Mechanical
Mounting the MK1000
The MK1000 can be mounted on a wall, pole or counter top. Separately sold mounting
accessories are listed below.
• Wall Mount Kit
• Pole Mount Kit
• Counter Top Stand
The MK1000 can also be mounted without the accessories listed above. To mount the
MK1000 on a wall without using the wall mount kit, follow the instructions below.
1. Determine the MK1000 mounting location.
2. Using a pencil, mark the mounting screw location. Refer to the mounting template
provided in the MK1000 Quick Reference Guide (p/n 72-52968-xx) included with
every MK1000. The screws must be 5 inches (12.7 cm) apart, left to right: and, 6
inches (15.3 cm) apart, top to bottom.
Figure 2-3. Mounting Dimensions
There must be a clearance of at least 9/16 of an inch (14.3mm) between the center of the
right side mount holes and nearest object.
5”
6” (15.3 cm)
(12.7 cm)