Symbol Technologies MK1000 - Manual (Page 193)

F-11
Troubleshooting
(continued)
MK1000 will not communicate
over a wired-Ethernet
connection.
4. Confirm the Wireless (RF)
Ethernet Setup is DISABLED.
- Scroll the cursor down to Radio by
pressing ‘3’.
- With the cursor on Radio, press ‘4’
(Radio Configuration screen
appears).
- On the Radio Configuration screen
(3rd line), Enabled must = No.
- If Enabled = Yes, with the cursor
on Enabled, press the ‘4’ button.
Enabled should now = No. See
Troubleshooting Note 1.
- Press ‘1’ (Network Configuration
screen re-appears).
- Press ‘1’ (MK1000 Configuration
menu re-appears).
5. Save ALL changes made and
EXIT the MK1000 Configuration
menu.
- Scroll the cursor down to Save &
Reboot by pressing the ‘3’ button
three times.
- With the cursor on Save & Reboot,
press ‘4’. (MK1000 Configuration
menu is exited, all change made are
saved, and the unit reboots as
described in Troubleshooting Note
1.)
Table F-1. Troubleshooting (Continued)
Problem Possible Causes Possible Solutions