Symbol Technologies MK1000 - Manual (Page 97)

3-49
Setup and Installation: Communication
To properly navigate the MK1000 Configuration screens, the Telnet client must be
configured to Keyboard Mapping = VT100 / ANSI terminal emulation.
If running a Telnet session from a laptop, you may need to turn off the "Num Lock" key.
Saving Changes and Exiting the Telnet Session
After you have navigated through the necessary screens and made your desired changes,
you can save these changes by highlighting the "Save & Reboot" option from the MK1000
Configuration menu and then pressing the Enter key.