Symbol Technologies MK1000 User Manual

Page 91

Advertising
background image

3-43

Setup and Installation: Communication

Data Bits

Press the Previous or Next buttons to move the "<"
cursor to this field and toggle by pressing the Enter
button to select the Data Bits.

The default Data Bits setting for MK1000 RS-232
port settings is 8 BITS.

Available Data Bits settings: 7 BITS or 8 BITS.

Stop Bits

Press the Previous or Next buttons to move the "<"
cursor to this field and toggle by pressing the Enter
button to select the Stop Bits.

The default Stop Bits setting for MK1000 RS-232
port settings is 1 BIT.

Available Stop Bits settings: 1 BIT or 2 BITS.

Flow Control

Press the Previous or Next buttons to move the "<"
cursor to this field and toggle by pressing the Enter
button to select the Flow Control.

The default Flow Control setting for MK1000 RS-
232 port settings is DTR/DSR.

Available Flow Control settings: DTR/DSR, BUSY,
NONE, or XON/OFF.

Echo Mode

Press the Previous or Next buttons to move the "<"
cursor to this field and toggle by pressing the Enter
button to select the Echo Mode.

The default Echo Mode setting for MK1000 RS-232
port settings is OFF.

Available Echo Mode settings: ON or OFF.

Rx Mode

Press the Previous or Next buttons to move the "<"
cursor to this field and toggle by pressing the Enter
button to select the Rx Mode.

The default Rx Mode setting for MK1000 RS-232
port settings is XPT.

Available Rx Mode settings: PRTR, CMDL, or XPT.

Table 3-18. RS-232 Config Screen Definitions (Continued)

Field Name

Description

Advertising