SMC Networks SMC TigerStack II SMC6624M - Manual (Page 216)

9-46
Configuring Advanced Features
Stack Management
Co
nf
ig
u
ri
ng Adva
nce
d
Feat
u
res
■ Stacking uses only the primary VLAN on each switch in a stack.
■ The primary VLAN can be tagged or untagged as needed in the
stacking path from switch to switch.
■ The same VLAN ID (VID) must be assigned to the primary VLAN in
each stacked switch.
Web: Viewing and Configuring Stacking
Figure 9-38. Example of the Web Browser Interface for a Commander
The web browser interface for a Commander appears as shown above. The
interface for Members and Candidates appears the same as for a non-stacking
SMC6624M switch.
To view or configure stacking on the web browser interface:
1. Click on the Configuration tab.
2. Click on [Stacking] to display the stackingconfiguration for an individual
switch, and make any configuration changes you want for that switch.