SMC Networks SMC TigerStack II SMC6624M - Manual (Page 87)

5-19
Configuring IP Addressing, Interface Access, and System Information
Interface Access: Console/Serial Link, Web, and Inbound Telnet
Co
n
fig
u
rin
g
IP Ad
d
re
ssin
g
,
In
te
rf
ac
e
A
c
ce
ss
, an
d
Figure 5-6. Example of Executing the Console Command with Multiple Parameters
You can also execute a series of console commands and then save the
configuration and boot the switch. For example:
Figure 5-7. Example of Executing a Series of Console Commands
The switch implements the Event Log change immediately. The switch implements
the other console changes after executing
write memory and reload .
Configure
the
individual
parameters.
Save the
changes.
Boot the
switch.