SMC Networks SMC TigerStack II SMC6624M - Manual (Page 75)

5-7
Configuring IP Addressing, Interface Access, and System Information
IP Configuration
Co
n
fig
u
rin
g
IP Ad
d
re
ssin
g
,
In
te
rf
ac
e
A
c
ce
ss
, an
d
Viewing the Current IP Configuration. The following command displays
the IP addressing for each VLAN configured in the switch. If only the
DEFAULT_VLAN exists, then its IP configuration applies to all ports in the
switch. Where multiple VLANs are configured, the IP addressing is listed per
VLAN. The display includes switch-wide packet time-to-live, and (if config-
ured) the switch’s default gateway and Timep configuration.
Syntax: show ip
For example, in the factory-default configuration (no IP addressing assigned),
the switch’s IP addressing appears as:
Figure 5-2. Example of the Switch’s Default IP Addressing
With multiple VLANs and some other features configured, show ip provides
additional information:
Figure 5-3. Example of Show IP Listing with Non-Default IP Addressing Configured
(If DHCP/Bootp acquires an IP address and Subnet Mask for VLAN_2, they
will appear in the appropriate columns.)
The Default IP
Configuration on
the SMC6624M
An SMC6624M
with VLANs
Configured