SMC Networks SMC TigerStack II SMC6624M - Manual (Page 32)

2-12
Using the Menu Interface
Rebooting the Switch
U
si
n
g t
h
e Me
nu
I
n
te
rf
a
c
e
Rebooting To Activate Configuration Changes. Configuration changes
for most parameters become effective as soon as you save them. However,
you must reboot the switch in order to implement a change in the
Maximum
VLANs to support parameter . (To access this parameter, go to the Main menu and
select 2. Switch Configuration, then 8. VLAN Menu, then 1. VLAN Support .)
If configuration changes requiring a reboot have been made, the switch
displays an asterisk (
*) next to the menu item in which the change has been
made. For example, if you change and save the value for the Maximum VLANs to
support parameter, an asterisk appears next to the VLAN Support entry in the
VLAN Menu screen, and also next to the the Switch Configuration . . . entry in the
Main menu, as shown in figure 4-6:
Figure 4-4. Indication of a Configuration Change Requiring a Reboot
To activate changes indicated by the asterisk, go to the Main Menu and select
the
Reboot Switch option.
N o t e Executing the write memory command in the CLI does not affect pending
configuration changes indicated by an asterisk in the menu interface. That is,
only a reboot from the menu interface or a boot or reload command from the
CLI will activate a pending configuration change indicated by an asterisk.
Reminder to
reboot the switch
to activate
configuration
changes.
Asterisk indicates
a configuration
change that
requires a reboot
in order to take
effect.