SMC Networks SMC TigerStack II SMC6624M - Manual (Page 261)

9-91
Configuring Advanced Features
Multimedia Traffic Control with IP Multicast (IGMP)
C
o
nf
ig
u
ring Adva
nc
ed
Featu
res
Viewing the Current IGMP Configuration. This command lists the IGMP
configuration for all VLANs configured on the switch or for a specific VLAN.
Syntax: show ip igmp config IGMP configuration for all
VLANs on the switch
show ip igmp <vid> config IGMP configuration for a
specific VLAN on the switch,
including per-port data
(For IGMP operating status, see “Internet Group Management Protocol
(IGMP) Status” on page 10-16.)
For example, suppose you have the following VLAN and IGMP configurations
on the switch:
You could use the CLI to display this data as follows:
Figure 9-65. Example Listing of IGMP Configuration for All VLANs in the Switch
The following version of the show ip igmp command includes the VLAN ID (vid)
designation, and combines the above data with the IGMP per-port configura-
tion:
VLAN ID VLAN Name IGMP
Enabled Forward with
High Priority Querier
1 DEFAULT_VLAN Yes No No
22 VLAN-2 Yes Yes Yes
33 VLAN-3 No No No