SMC Networks SMC TigerStack II SMC6624M User Manual
Page 73
5-5
Configuring IP Addressing, Interface Access, and System Information
IP Configuration
Co
n
fig
u
rin
g
IP Ad
d
re
ssin
g
,
In
te
rf
ac
e
A
c
ce
ss
, an
d
To Configure IP Addressing.
1.
From the Main Menu, Select.
2. Switch Configuration ...
5. IP Configuration
N o t e
If multiple VLANs are configured, a screen showing all VLANs appears instead
of the following screen.
Figure 5-1. Example of the IP Service Configuration Screen without Multiple
VLANs Configured
2.
Press [E] (for
Edit).
3.
If the switch needs to access a router, for example, to reach off-subnet
destinations, select the
Default Gateway field and enter the IP address of
the gateway router.
4.
If you need to change the packet Time-To-Live (TTL) setting, select
Default
TTL and type in a value between 2 and 255 (seconds).
5.
At the
TimeP Config field do one of the following:
•
If you want the switch to obtain the IP address of the Timep server
via DHCP server, keep the value as
DHCP.
•
If you want to manually specify the IP address of the Timep server,
use the Space bar to select
Manual.
•
If you don’t have a Timep server set up, use the Space bar to change
the value to
Disabled.
The default setting for
TimeP Config is DHCP.
Setting it to Manual,
then pressing
[v] or [Tab]
causes the Server
Address parameter to
appear.
For descriptions of these
parameters, see the
online Help for this
screen.
Before using the DHCP/
Bootp option, refer to
“DHCP/Bootp
Operation” on page 5-10.