SMC Networks SMC TigerStack II SMC6624M - Manual (Page 292)

10-14
Monitoring and Analyzing Switch Operation
Status and Counters Data
M
oni
to
ri
n
g
and
An
al
yzi
n
g
Sw
itc
h
Op
e
ra
tio
n
Spanning Tree Protocol (STP) Information
Menu Access to STP Data
From the Main Menu, select:
1. Status and Counters . . .
7. Spanning Tree Information
STP must be enabled on the switch to display the following data:
Figure 10-10.Example of Spanning Tree Information
Use this screen to determine current switch-level STP parameter settings and
statistics.
You can use the Show ports action at the bottom of the screen to display port-
level information and parameter settings for each port in the switch (including
port type, cost, priority, operating state, and designated bridge) as shown in
Figure 10-11.