SMC Networks SMC TigerStack II SMC6624M - Manual (Page 349)

C-9
Switch Memory and Configuration
Using the Menu and Web Browser Interfaces To Implement Configuration Changes
S
w
itch M
e
m
o
ry an
d
Co
nf
ig
u
rat
io
n
(To access these parameters, go to the Main menu and select 2. Switch
Configuration, then 8. VLAN Menu, then 1. VLAN Support .)
If configuration changes requiring a reboot have been made, the switch
displays an asterisk (
*) next to the menu item in which the change has been
made. For example, if you change and save parameter values for the Maximum
VLANs to support parameter, an asterisk appears next to the VLAN Support entry in
the VLAN Menu screen, and also next to the the Switch Configuration . . . entry in
the Main menu, as shown in figure 4-6:
Figure 2-2. Indication of a Configuration Change Requiring a Reboot
Using the Web Browser Interface To Implement
Configuration Changes
You can use the web browser interface to simultaneously save and implement
a subset of switch configuration changes without having to reboot the switch.
That is, when you save a configuration change (in most cases, by clicking on
[Apply Changes] or [Apply Settings], you simultaneously change both the
running-config file and the startup-config file.
N o t e If you reconfigure a parameter in the CLI and then go to the browser interface
without executing a
write memory command, those changes will be saved to
the startup-config file if you click on [Apply Changes] or [Apply Settings] in
the web browser interface.
Reminder to
reboot the switch
to activate
configuration
changes.
Asterisk indicates
a configuration
change that
requires a reboot
in order to take
effect.