SMC Networks SMC TigerStack II SMC6624M - Manual (Page 255)

9-85
Configuring Advanced Features
GVRP
C
o
nf
ig
u
ring Adva
nc
ed
Featu
res
Displaying the Static and Dynamic VLANs Active on the Switch. The
show vlans command lists all VLANs present in the switch.
Syntax: show vlans
For example, in the following illustration, switch “A” has one static VLAN (the
default VLAN), with GVRP enabled and port 1 configured to
Learn for
Unknown VLANs. Switch “B” has GVRP enabled and has three static VLANs:
the default VLAN, VLAN-222, and VLAN-333. In this scenario, switch B will
dynamically join VLAN-222 and VLAN-333:
The show vlans command lists the dynamic (and static) VLANs in switch “B”.
Figure 9-64. Example of Listing Showing Dynamic VLANs
Switch “A”
GVRP enabled.
3 Static VLANs:
– DEFAULT_VLAN
– VLAN-222
– VLAN-33
Switch “B”
GVRP enabled.
1 Static VLANs:
– DEFAULT_VLAN
Dynamic VLANs
Learned from
Switch “A”
through Port 1