SMC Networks SMC TigerStack II SMC6624M - Manual (Page 85)

5-17
Configuring IP Addressing, Interface Access, and System Information
Interface Access: Console/Serial Link, Web, and Inbound Telnet
Co
n
fig
u
rin
g
IP Ad
d
re
ssin
g
,
In
te
rf
ac
e
A
c
ce
ss
, an
d
CLI: Modifying the Interface Access
Interface Access Commands Used in This Section
Listing the Current Console/Serial Link Configuration. This com-
mand lists the current interface access parameter settings.
Syntax : show console
This example shows the switch’s default console/serial configuration.
Figure 5-5. Listing of Show Console Command
Reconfigure Inbound Telnet Access. In the default configuration,
inbound Telnet access is enabled.
Syntax: [no] telnet-server
To disable inbound Telnet access:
SMC TigerSwitch 10/100(config)# no telnet-server
To re-enable inbound Telnet access:
SMC TigerSwitch 10/100(config)# telnet-server
show console below
[no] telnet-server below
[no] web-management page 5-18
console page 5-18
Interface Access
Enable/Disable
Console Control
Options
Event Log Event
Types To List