SMC Networks SMC TigerStack II SMC6624M - Manual (Page 290)

10-12
Monitoring and Analyzing Switch Operation
Status and Counters Data
M
oni
to
ri
n
g
and
An
al
yzi
n
g
Sw
itc
h
Op
e
ra
tio
n
2. Type the MAC address you want to locate and press [Enter]. The address
and port number are highlighted if found. If the switch does not find the
address, it leaves the MAC address listing empty.
Figure 10-8. Example of Menu Indicating Located MAC Address
Port-Level MAC Address Viewing and Searching. This feature displays
and searches for MAC addresses on the specified port instead of for all ports
on the switch.
1. From the Main Menu, select:
1. Status and Counters
6. Port Address Table
Figure 10-9. Listing MAC Addresses for a Specific Port
2. Use the Space bar to select the port you want to list or search for MAC
addresses, then press [Enter] to list the MAC addresses detected on that
port.
Determining Whether a Specific Device Is Connected to the Selected
Port.
Proceeding from step 2, above:
1. Press [S] (for Search), to display the following prompt:
Located MAC
Address and
Corresponding
Port Number
Prompt for Selecting
the Port To Search