SMC Networks SMC TigerStack II SMC6624M - Manual (Page 299)

10-21
Monitoring and Analyzing Switch Operation
Port Monitoring Features
M
oni
to
rin
g
and
An
al
yz
in
g
Sw
itc
h
Op
e
ra
tio
n
Menu: Configuring Port Monitoring
This procedure describes configuring the switch for monitoring when moni-
toring is disabled. (If monitoring has already been enabled, the screens will
appear differently than shown in this procedure.)
1. From the Console Main Menu, Select:
2. Switch Configuration...
3. Network Monitoring Port
Figure 10-16. The Default Network Monitoring Configuration Screen
2. In the Actions menu, press [E] (for Edit).
3. If monitoring is currently disabled (the default) then enable it by pressing
the Space bar (or [Y]) to select Yes.
4. Press the downarrow key to display a screen similar to the following and
move the cursor to the
Monitoring Port parameter.
Enable monitoring
by setting this
parameter to “Yes”.