SMC Networks SMC TigerStack II SMC6624M - Manual (Page 347)

C-7
Switch Memory and Configuration
Using the Menu and Web Browser Interfaces To Implement Configuration Changes
S
w
itch M
e
m
o
ry an
d
Co
nf
ig
u
rat
io
n
N o t e The only exception to this operation are two VLAN-related parameter changes
that require a reboot—described under “Rebooting To Activate Configuration
Changes” on page C-8.
Using Save and Cancel in the Menu Interface
For any configuration screen in the menu interface, the Save command:
1. Implements the changes in the running-config file
2. Saves your changes to the startup-config file
If you decide not to save and implement the changes in the screen, select
Cancel to discard them and continue switch operation with the curent opera-
tion. For example, suppose you have made the changes shown below in the
System Information screen:
Figure 2-2. Example of Pending Configuration Changes that Can Be Saved or
Cancelled
N o t e If you reconfigure a parameter in the CLI and then go to the menu interface
without executing a
write memory command, those changes are stored only in
the running configuration (even if you execute a Save operation in the menu
interface). If you then execute a switch reboot command in the menu inter-
To save and
implement the
changes for all
parameters in this
screen, press the
key, then press
(for Save). To
cancel all changes,
press the
key,
then press (for
Cancel)