SMC Networks SMC TigerStack II SMC6624M - Manual (Page 291)

10-13
Monitoring and Analyzing Switch Operation
Status and Counters Data
M
oni
to
rin
g
and
An
al
yz
in
g
Sw
itc
h
Op
e
ra
tio
n
Enter MAC address: _
2. Type the MAC address you want to locate and press [Enter]. The address
is highlighted if found. If the switch does not find the address, it leaves
the MAC address listing empty.
CLI Access for MAC Address Views and Searches
Syntax: show mac-address
[vlan <vlan-id>]
[ethernet]<port-list>]
[<mac-addr>]
To List All Learned MAC Addresses on the Switch, with The Port
Number on Which Each MAC Address Was Learned.
SMC TigerSwitch 10/100> show mac-address
To List All Learned MAC Addresses on one or more ports, with Their
Corresponding Port Numbers.
For example, to list the learned MAC
address on ports 1 through 5 and port 7:
SMC TigerSwitch 10/100> show mac-address 1-5,7
To List All Learned MAC Addresses on a VLAN, with Their Port
Numbers.
This command lists the MAC addresses associated with the ports
for a given VLAN. For example:
SMC TigerSwitch 10/100> show mac-address vlan 100
N o t e The SMC6624M switch has a Single Forwarding Database architecture. This
means the switch has only a single MAC address table, and not a separate MAC
address table per VLAN.
To Find the Port On Which the Switch Learned a Specific MAC
Address.
For example, to find the port on which the switch learns a MAC
address of 0060b0-889e00:
SMC TigerSwitch 10/100> show mac-address 0060b0-889e00