KTM 450 EXC-R EU - Manual (Page 44)

MAINTENANCE WORK ON CHASSIS AND ENGINE
42
100023-11
(EXC-R bEU, EXC-RbAUS/UK, EXC-RbUSA, XCR-WbZA)
ದ Loosen screw b  . Remove the fork leg on the left.
ದ Loosen screw b  . Remove the fork leg on the right.

Installing the fork legs b
x
100021-10
ದ Check parts for damage and wear. Replace damaged or worn parts.
ದ Position the fork legs.
Info
The topmost sunk nut in the fork leg must be flush to the upper edge of the
upper triple clamp.
Position the bleeder screw
b  to the front.
500094-11
(EXC-R bSIXbDAYS, XCR-WbUSA)
ದ Fully tighten screw b  .
Specification
Screw, top triple clamp M8 17 bNm
(12.5 blbfbft)
ದ Fully tighten screw b  .
Specification
Screw, bottom triple clamp M8 12 bNm
(8.9 blbfbft)
100023-10
(EXC-R bEU, EXC-RbAUS/UK, EXC-RbUSA, XCR-WbZA)
ದ Fully tighten screw b  .
Specification
Screw, top triple clamp M8 20 bNm
(14.8 blbfbft)
ದ Fully tighten screw b  .
Specification
Screw, bottom triple clamp M8 15 bNm
(11.1 blbfbft)
500093-11
ದ Position brake caliper, mount and tighten screws b  .
Specification
Screw, front brake caliper M8 25 bNm
(18.4 blbfbft)
Loctite ® 243™
ದ Fit cable clip b  .
ದ Position the brake line and cable harness. Put the clamp on, mount and tighten
screws
b  .
ದ Fit front wheel. ( P. 64)