Document Outline

• Safety Information
• 1 Introduction
  • Scanner features
  • Scanner options
  • Scanner components
  • Operating keys and indicators
• 2 Getting Started
  • Turning on the scanner
  • Selecting the language display
  • Calibrating the scanner
    • Unsuccessful calibration
  • Preparing documents for scanning
  • Adjusting the feed and separator roller gab (semi-automatic feeder only)
  • Adjusting the feed shelf position (semi-automatic feeder only)
  • Adjusting the feed shelf side guides (semi automatic feeder only)
  • Adjusting the exit hopper side guides and end stop
  • Changing the deflector
• 3 Operating the Scanner
  • Overview
  • Selecting a mode
  • Temporary operating values
  • Feeding documents using the semi-automatic feeder
    • Feeding thick documents
  • Feeding documents using the automatic feeder
• 4 Function Codes
  • Using function codes
  • Function code summary
  • Function code listing
• 5 Maintenance
  • Cleaning tasks
  • Cleaning materials
  • Replacement parts
  • Daily maintenance procedures
    • Cleaning the imaging guides
    • Cleaning the feed and separator rollers (semi-automatic feeder)
    • Cleaning the feeder modules and separator roller (automatic feeder)
    • Cleaning the paper path
    • Vacuuming inside the scanner
    • Cleaning the feeder/horizontal transport area
    • Cleaning the lower roller housing assembly area
  • Weekly maintenance procedures
    • Cleaning the exposure lamp housings
    • Cleaning the cabinet
  • Monthly maintenance procedures
    • Cleaning the air filter
  • Replacement procedures
    • Replacing the air filter
    • Replacing the exposure lamps
    • Replacing the imaging guides
    • Replacing the feeder module and separator roller
  • Ordering replacement parts
  • Ordering cleaning materials
• 6 Operator Messages
  • Operator message listing
• 7 Troubleshooting
  • Trouble and remedy chart
  • Clearing the document path
    • The document path
    • Clearing documents
    • The feeder/horizontal transport area
    • The imaging guide area
    • The lower roller assembly area
    • The vertical transport area
    • The upper turn area
    • The document exit area
• 8 Accessories
  • Supplies
  • Parts and tools
  • Using the Bar Code Reader
    • Bar code types
    • Bar code placement
    • Before you begin
    • Enabling bar code reading
    • Enabling the bar code confirmation tone
    • Performing a bar code test
      • Using the Evaluate option
        • Static bar code evaluation
        • Dynamic bar code evaluation
      • Evaluating test results
      • Using the Display option
      • Using the %KODAK option
      • Using the %NORM option
  • Using the Check Feeder / Check Stacker
    • Using the check feeder
    • Clearing jams in the check feeder
    • Cleaning the check feeder
    • Using the check stacker
  • Using the Endorser
    • Die styles
    • Before you begin
    • Changing the die drum
    • Changing the ink roller
    • Setting the date and code number
    • Enabling the Endorser
    • Changing the print position
    • Selecting the Endorser mode
  • Using the Footswitch
    • Enabling the confirmation tone
    • Footswitch Pressed actions
    • Footswitch Released options
  • Using the Patch Reader
    • Patch types
    • Patch code placement
    • Before you begin
    • Positioning the Patch Reader
    • Using the Patch Reader
    • Enabling patch reading
    • Enabling the patch code confirmation tone
    • Cleaning the Patch Reader
• Appendix A Basic Concepts
  • Modes
  • Linked modes
  • Image addresses
  • Assigning an image address
  • Image address formats
  • Indexing schemes
    • Single level indexing
    • Two level indexing
    • Two level offset indexing
    • Three level indexing
    • Three level offset indexing
  • Controlling document level changes