Lantronix XPort AR - Manual (Page 102)

11: Maintenance and Diagnostics Settings
XPort AR User Guide 102
Note: Both the IP and MAC addresses are required for the ARP cache.
IP Address Filter
The IP address filter allows specified hosts and subnets to communicate with the XPort AR.
Note: If using DHCP/BOOTP, ensure the DHCP/BOOTP server IP address is in the list.
To configure the IP address filter, perform the following steps.
1. Click the IP Address Filter on the Main Menu. Figure 11-7 shows the page that displays.
Figure 11-7 IP Address Filter Web Page
Note: Be aware not to assign your network IP address as “filtered.”Doing so will prevent
you from accessing the XPort AR. You will have to then access the XPort AR from a
different computer to reset the configuration.