Lantronix XPort AR - Manual (Page 26)

4: Configuration Using Web Manager
XPort AR User Guide 26
Navigating the Web Manager
The Web Manager provides an intuitive point-and-click interface. A menu bar on the left side of
each page provides links you can click to navigate from one page to another. Some pages are
read-only, while others let you change configuration settings.
Note: There may be times when you must reboot the XPort AR for the new configuration
settings to take effect. The chapters that follow indicate when a change requires a reboot.
Table 4-1 Summary of Web Manager Pages
Web Manager Page Description Page
Status Shows product information and network, line, and tunneling
settings. 24
CLI Shows Command Line Interface (CLI) statistics and lets you
change the current CLI configuration settings. 118
CPM Shows information about the Configurable Pins Manager (CPM)
and how to set the configurable pins and pin groups to work with
a device. 60
Diagnostics Lets you perform various diagnostic procedures. 94
DNS Shows the current configuration of the DNS subsystem and the
DNS cache. 67
Email Shows email statistics and lets you clear the email log, configure
email settings, and send an email. 116
Filesystem Shows file system statistics and lets you browse the file system
to view a file, create a file or directory, upload files using HTTP,
copy a file, move a file, or perform TFTP actions. 95
FTP Shows statistics and lets you change the current configuration for
the File Transfer Protocol (FTP) server. 71
Host Lets you view and change settings for a host on the network. 58
HTTP Shows HyperText Transfer Protocol (HTTP) statistics and lets
you change the current configuration and authentication settings. 75
IP Address Filter Lets you specify all the IP addresses and subnets that are
allowed to send data to this device. 102
Line Shows statistics and lets you change the current configuration
and Command mode settings of a serial line. 32
Network Shows status and lets you configure the network interface. 29
PPP Lets you configure a network link using Point-to-Point Protocol
(PPP) over a serial line. 68
Protocol Stack Lets you perform lower level network stack-specific activities. 98
Query Port Lets you change configuration settings for the query port. 103
RSS Lets you change current Really Simple Syndication (RSS)
settings. 80