Table 11-1 filesystem browser fields – Lantronix XPort AR User Manual
Page 97
11: Maintenance and Diagnostics Settings
XPort AR User Guide
97
3.
Click the X next to a filename to delete the file and then you can delete the directory. The
directory has to be empty before you can delete it.
Note:
Changes apply to the current directory view. To make changes within other
folders, click the folder or directory and then enter the parameters in the settings listed in
Files can be copied or moved by using the fields noted in
.
Table 11-1 Filesystem Browser Fields
Field
Description
Create
File
Enter the name of the file you want to create, and then click Create.
Directory
Enter the name of the directory you want to create, and then click Create.
Upload File
Enter the path and name of the file you want to upload by means of HTTP(S)
or use the Browse button to select the file, and then click Upload.
Copy File
Source
Enter the location where the file you want to copy resides.
Destination
Enter the location where you want the file copied. After you specify a source
and destination, click Copy to copy the file.
Move
Source
Enter the location where the file you want to move resides.
Destination
Enter the location where you want the file moved.
After you specify a source and destination, click Move to move the file.
TFTP
Action
Select the action that is to be performed via TFTP:
Get—A TFTP get command will be executed to store a file locally.
Put— A TFTP put command will be executed to send a file on the local file
system to a remote location.
Mode
Select a TFTP mode to use. Choices are:
ASCII
Binary
Local File
Enter the name of the local file.
Remote File
Enter the name of the file at the remote location that is to be stored locally
(get) or externally (put).
Host
Enter the IP address or name of the host involved in this operation.
Port
Enter the number of the port involved in TFTP operations on which the
specified TFTP get or put command will be performed. Click Transfer to
perform the TFTP transfer.