Lantronix XPort AR - Manual (Page 29)

5: Network Settings
XPort AR User Guide 29
Network 1 Interface Configuration
To configure the Network interface, perform the following steps.
1. Click Network on the Main Menu.
2. Click Network 1 > Interface > Configuration. Figure 5-2 shows the page that displays.
Figure 5-2 Network 1 (eth0) Interface Configuration Web Page
3. Enter or modify the fields in Table 5-1 .
Table 5-1 Network 1 Interface Configuration Fields
Field Description
BOOTP Client Select On or Off. At boot up the XPort AR will attempt to obtain an IP
address from a BOOTP server.
Notes:
 Overrides the configured IP address, network mask, gateway,
hostname, and domain.
 When DHCP is On, the system automatically uses DHCP, regardless of
whether BOOTP Client is On.