Lantronix XPort AR - Manual (Page 61)

8: Configurable Pins Manager
XPort AR User Guide 61
When you are ready to permanently configure the CPs, see the CPM Groups web page. See CPM
Groups on page 63.
Change CPs
To change XPort AR CPs, perform the following steps.
1. Click CPM on the menu bar and then CPs at the top of the page. Figure 8-1 shows the page
that displays. Table 8-1 lists and describes the current configuration fields.
Figure 8-1 CPM CPs Page
Table 8-1 CPM CPs Current Configuration Fields and Descriptions
Field Description
CP Indicates the configurable pin number.
Ref Indicates the hardware pin number associated with the CP.
Configured As Shows the current CP configuration. A CP configured as Input is set to read
input. A CP configured as Output drives data out of the XPort AR.