Lantronix XPort AR - Manual (Page 22)

3: Using DeviceInstaller
XPort AR User Guide 22
Device Family Shows the XPort AR device family type as “XPort”.
Type Shows the device type as XPort AR.
ID Shows the XPort AR ID embedded within the unit.
Hardware Address Shows the XPort AR hardware (MAC) address.
Firmware Version Shows the firmware currently installed on the XPort AR.
Extended Firmware Version Provides additional information on the firmware version.
Online Status Shows the XPort AR status as Online, Offline, Unreachable (the XPort
AR is on a different subnet), or Busy (the XPort AR is currently
performing a task).
IP Address Shows the XPort AR current IP address. To change the IP address,
click the Assign IP button on the DeviceInstaller menu bar.
IP Address was Obtained Displays dynamically if the XPort AR automatically received an IP
address (e.g., from DHCP). Displays statically if the IP address was
configured manually.
If the IP address was assigned dynamically, the following fields
appear:
 Obtain via DHCP with values of True or False.
 Obtain via BOOTP with values of True or False.
Subnet Mask Shows the subnet mask specifying the network segment on which the
XPort AR resides.
Gateway Shows the IP address of the router of this network. There is no default.
Number of Ports Shows the number of serial ports on this XPort AR.
Supports Configurable Pins Shows True, indicating that configurable pins are available on the
XPort AR.
Supports Email Triggers Shows True, indicating email triggers are available on the XPort AR.
Telnet Enabled Indicates whether Telnet is enabled on this XPort AR.
Telnet Port Shows the XPort AR port for Telnet sessions.
Web Enabled Indicates whether Web Manager access is enabled on this XPort AR.
Web Port Shows the XPort AR port for Web Manager configuration.
Firmware Upgradeable Shows True, indicating the XPort AR firmware is upgradeable as
newer versions become available.
Table 3-1 Current Settings and Description (continued)
Current Settings Description