Lantronix XPort AR - Manual (Page 38)

6: Line and Tunnel Settings
XPort AR User Guide 38
1. Click Tunnel on the Main Menu. Figure 6-4 shows the page that displays.
Figure 6-4 Tunnel 1 Statistics Web Page
Serial Settings
Serial line settings are configurable for both serial line 1 and serial line 2. Configure the buffer size
to change the maximum amount of data the serial port stores. For any active connection, the XPort
AR sends the data in the buffer.
The modem control signal DTR on the Line may be continually asserted or asserted only while
either an Accept Mode tunnel or a Connect Mode tunnel is connected.
To configure the serial settings, perform the following steps.