Snmp configuration, Table 9-1 ppp configuration fields – Lantronix XPort AR User Manual
Page 69
9: Services Settings
XPort AR User Guide
69
2.
.
3.
Click Submit.
SNMP Configuration
Simple Network Management Protocol (SNMP) is a network management tool that monitors
network devices for conditions that need attention. The Web Manager configured SNMP service
sends traps whenever a request for information that contains an incorrect community name and
does not match an accepted system name for the service gets sent.
To configure SNMP, perform the following steps.
Table 9-1
PPP Configuration Fields
Field
Description
Local IP Address
Enter the IP address assigned to the XPort AR’s PPP interface.
Peer IP Address
Enter the IP address assigned to the peer (when requested during
negotiation).
Authentication Mode
Choose the authentication mode:
None—No authentication is required.
PAP—Password Authentication Protocol.
CHAP—Challenge–Handshake Authentication Protocol.
Username
Enter a username if authentication will be used on the PPP interface. The
peer must be configured to use the same username.
Password
Enter a password if authentication will be used on the PPP interface. The
peer must be configured to use the same password.