Lantronix XPort AR - Manual (Page 128)

12: Advanced Settings
XPort AR User Guide 128
2. Enter the fields shown in Table 12-5 .
3. Click Import.
Import Line(s) from Single Line Settings on the Filesystem
This selection copies line settings from the single line instance in the input file to selected lines.
The import file may only contain records from a single line instance; this is done by selecting a
single line to export when exporting the file.
To import line settings on the Filesystem, perform the following steps.
Table 12-5 Import Configuration from Filesystem Fields
Field Description
Filename Enter the name of the file on the XPort AR (local to its filesystem) that
contains XCR data.
Lines to Import Select the lines or network whose settings you want to import. Click the
Select All link to select all the serial lines and the network lines. Click the
Clear All link to clear all of the checkboxes. By default, all line instances are
selected.
Only the selected line instances will be imported in the line, LPD, PPP,
tunnel, and terminal groups.
Whole Groups to Import Select the configuration groups to import from the XML configuration record.
This option imports all instances of each selected group unless it is one of
the Lines to Import.
Note: By default, all groups are checked except those pertaining to the
network configuration; this is so that import will not break your network
connectivity.
You may check or uncheck any group to include or omit that group from
import. To import all of the groups, click the Select All but Networking link
to import all groups. To clear all the checkboxes, click the Clear All link.
Text List Enter a string to import specific instances of a group. The textual format of
this string is: <g>:<i>;<g>:<i>;.
Each group name <g> is followed by a colon and the instance value <i> and
each <g>:<i> value is separated by a semi-colon. If a group has no instance,
then specify the group name <g> only.
Use this option for groups other than those affected by Lines to Import.