Lantronix XPort AR - Manual (Page 78)

9: Services Settings
XPort AR User Guide 78
HTTP Authentication
To configure HTTP authentication, perform the following steps.
1. Click HTTP > Authentication. Figure 9-9 shows the page that displays.
Figure 9-9 HTTP Authentication Web Page
2. Enter or modify the fields in Table 9-7 .
Table 9-7 HTTP Authentication Fields
Fields Description
URI Enter the Uniform Resource Identifier (URI).
Note: The URI must begin with ‘/’ to refer to the filesystem.
Realm Enter the domain, or realm, used for HTTP. Required with the URI field.