Lantronix XPort AR - Manual (Page 103)

11: Maintenance and Diagnostics Settings
XPort AR User Guide 103
2. Enter or modify the fields in Table 11-4 .
3. Click Add.
Note: You can remove IP addresses by clicking [Remove] in the Current State table.
Query Port
The query port (0x77FE) is used for the automatic discovery of the device by the DeviceInstaller
utility. Only 0x77FE discover messages from DeviceInstaller are supported. For more information
on DeviceInstaller, see
3: Using DeviceInstaller .
To configure the query port server, perform the following steps.
1. Click Query Port on the Main Menu. Figure 11-8 shows the page that displays.
Figure 11-8 Query Port Web Page
Table 11-4 IP Address Filter Fields
Field Description
IP Address Enter the IP address to add to the IP filter table.
Network Mask Enter the IP address’ network mask in dotted notation.